Y Series

Multipole connection

The multipole cover comes in three versions to connect 4, 6 or 8 valve positions.
Each position can have either a single or double coil.
It is possible to join two or more valve islands placing a plate
for intermediate supply under the Sub-D socket of subsequent modules..
The modules making up the island can have 2, 4, 6,or 8 valve positions and can be separated by a pass-through
seal (P) or a diaphragm seal (T).
There are no limits to the number of valves positions that can be created and in this case, the electrical connection
will be created with multiple covers, each one of which with a multipole cable (see “Solenoid valve connectors - 25
pole Sub-D socket”).

Technical specifications

Construction	Spool-type with seals
Materials	Aluminium spool; brass cartridges: NBR seals, end covers and covers in technopolymer.
Valve pitch	12,5 mm
Ports	Ports 2 and 4 = 1/8" (use 6512 ...1/8-M connections) Supplies 1 and 11 = 1/4" Exhaust 3/5 = 1/2" Pilot ports 12/14 = 1/8" Pilot port exhaust 82/84 = 1/8"
Temperature	0 ÷ 50 °C
Fluid	Filtered air (5 μ or lower) without lubrication * NB: for solenoid pilot valves, filtration at 0,01 μ (DIN ISO 8573-1) is recommended
Flow rate	800 Nl/min (measured at 6 bar Δp 1)
Operating pressure	-0.9 ÷ 10 bar (external piloted)
Piloting pressure	3 ÷ 7 bar